www.gouldfo.com this is the new power of gould ! 01/09/03 1121 benfield blvd., millersville, md 21108 toll free: 800-54-gould voice: 410.987.5600 fax: 410.987.1201 email: info@gouldfo.com web: www.gouldfo.com patch cords gould cable assemblies feature quality part s and guaranteed performance specifications. ? specifications are per mated pair at both 1310nm and 1550nm. connector insertion/return loss specifications for singlemode fiber end number connector insertio n loss typical return loss 2 = st < 0.50db >50db 3 = fc < 0.35db >50db 4 = sc < 0.35db >50db 5 = lc < 0.35db >40db 6 = fc/apc < 0.35db >60db 7 = sc/apc < 0.35db >60db ordering information product number 6___- ___ ___ ___ ___ ___ - ___ ___ - ___ ___ ___ ___ 1 data sheet- patch cords length in meters xx.xx i.e.., 3 meters=0300 testing requirements 0= insertion loss testing data only 1= insertion loss and return loss testing data 2= insertion loss and endface geometry data 3= insertion loss, return loss and endface geometry data buffer type 10= no buffering (not recommended!) 11= 900 micron, white, pvdf (temp. rating ?40 to +85 c, ul 94v-0 rated) 12= 900 micron, orange, pvdf (temp. rating ?40 to +85 c, ul 94v-0 rated) 13= 900 micron, blue, pvdf (temp. rating ?40 to +85 c, ul 94v-0 rated) 15= 900 micron, green, pvdf (temp. rating ?40 to +85 c, ul 94v-0 rated) 19= 900 micron, yellow, pvdf (temp. rating ?40 to +85 c, ul 94v-0 rated) 21= 900 micron, white, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 22= 900 micron, orange, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 23= 900 micron, blue, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 24= 900 micron, red, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 25= 900 micron, green, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 26= 900 micron, black, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 27= 900 micron, brown, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 28= 900 micron, gray/slate, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 29= 900 micron, yellow, hytrel (temp. rating ?20 to +70 c, ul 94v-hm rated) 31= 2.9 mm x 0.4mm, kevlar reinforced tubing, yellow 32= 2.9 mm x 0.4 mm, kevlar reinforced tubing, orange 33= 2.9 mm x 0.9 mm, kevlar reinforced tubing, orange 34= 2.9 mm x 0.45 mm, kevlar reinforced tubing, black patchcord type 2= singlemode 4= multimode fiber type 03=corning smf-28, 100 kpsi proof test on fiber 06= corning flexcore (5/125) 11= 50/125 graded index (corning) 12= 62.5/125 graded index (corning) 22= 200/230/500, 0.37na si mm hcs (lucent) 23= 200/230/500, 0.48na si mm hcs (lucent) 25= 100/140/250 step index (lucent) 27= corning flexcore (7/125) 32= corning smf-28, 200 kpsi proof test on fiber 54= corning flexcore (7/125), 200 kpsi proof test on fiber connector end b 0= pigtail assembly 2= st/upc 3= fc/upc 4= sc/upc 5= lc/upc 6= fc/apc 7= sc/apc a= lc/apc b= mu/upc c= mu/apc connector end a 2= st/upc 3= fc/upc 4= sc/upc 5= lc/upc 6= fc/apc 7= sc/apc a= lc/apc b= mu/upc c= mu/apc
www.gouldfo.com this is the new power of gould ! 01/09/03 notes: 1. regarding multimode cable assemblies, insertion loss tested with broadband light source under fully filled launch conditions. this is the only launch condition under which g ould fiber optics will guarantee performance for insertion loss. 2. for large core (>62.5 micron) fiber, in sertion loss is the only option for testing for standard product. 3. connector options a, b, and c are available for singlemode applications only as standard practice. for ?large core? multimode fiber, only connector option 2 is available. 4. for large core multimode fiber (f iber codes 22, 23, and 25) the standard buffering option is 33. standard length tolerance is +/- 5 cm on lengths below 20 meters, and +/- 10 cm for lengths above 20 meters. c ontact your sales representative for different options . patchcord part number example: if you want to order a 3.5 meter patc hcord with an sc/apc connector on one end and fc/apc on the other, corning 200 kpsi smf-28 fiber buffered with 900 micron black hytrel, and you require il, rl and endface geometry data, you would order part number 62-33226-67-03501. for custom options and additional in formation, please contact us at: phone: 1-410-987-5600 fax: 1-410-987-1201 web: www.gouldfo.com all data listed in this data sheet is subjected to ch ange without notice. gould reserves the right to revise or update the da ta sheet. copyright 2002 by gould fiber optics.
|
